Plastic Spray Paint ,Plastic Parts Spray Paint ,Mechanical Parts Spray Paint,Spray Paint For Plastic Dandong Jinggong Heat Preservation Appliance Factory , https://www.jgplastic.com
Â
Product Show
 
Machine Layout
Hopper; Â Â 2. Main machine; Â Â 3. Heat-water sink; Â Â 4. Cold-water sink; Â Â 5. Traction machine; Â Â 6. Infrared diameter gauging device; Â Â 7. Winding machine
Â
Â
Product Description
No.
Name
Quantity
1.0
Drying hopper
1
2.0
Extruding machine
Â
2.1
ABS PLA single screw extruder
1
2.2
Bush die
1
3.0
Water sink
1
4.0
Traction machine
1
5.0
Wire storage support
1
6.0
Infrared diameter gauging device
1
7.0
Winding machine
1
8.0
Single coil forming machine
1
Â
Â
Â
Product Details
1.0 Â Name: drying hopper
Volume:
60L;
Output:
50kg/h;
Heating power:
10kw;
Characteristics:
Protect the fan and electric heating tube. Famous brand electric elements and stable performance. Materials of theating tube: 304 stainless steel without pollution and long service life. The sealing rings adopt the insulation silicone rubber.
 2.1  Name: single screw extruder(TD-SJC25)
Screw diameter:
Φ25mm;
L/D:
25;
Screw material:
38CrMoAlA;
Surface treatment of screw:
Hard chromium plating treatment; thickness of chromium coating: 0.5~0.6mm; hardness: HRC65.
Compression ratio:
C/R=3.0 BM screw;
The design of screw is applicable to special rollers of ABS PLA plastic granule.
Heater:
The stainless steel heater with the internal surface receiving polished finish and the external surface of stainless steel.
Heating section and power:
3 heating sections; 1.8kw/section;
Cooling of the roller:
Air cooling of high efficiency and low noise
Cooling section and power:
3 cooling sections, 120w/section;
Reduction box:
Hard tooth surface reduction box with spiral speed reduction transmission.
ZLY173 hard tooth surface helical tooth cylindrical gear reduction box, selection of 20CrMn materials, malcomising;the tooth surface receives gear-grinding machining with the noise lower than 75Db and centrifugal lubrication of machine oil.
Bearing brand:
Japan "NSK"
Driving motor:
AC "TECO" frequency converter, Wannan motor
Control system:
Cabinet form:
The configuration of insulating plate and ventilating system conforms to the standard of CE certification.
Setting of functional panel:
Power indicator, display of main current/voltage, temperature display of the heating area, heating starting/stoping button, display of screw rotating speed, operation, operation panel, pulling speed control, coiling speed control, plastic wire diameter display alarm button, emergency button.
2.2 Â Name: ABS PLA bush die The head of wire drawing machine: 2 molds and applicable to draw wire of 1.6mm, 18.mm,2mm, 2.2m, 2.4mm, 2.6mm, 2.8mm, 3mm. The wire used to make ABS and PLA is 1.75mm and 3mm. Bypass discharge device makes it convenient to change color of plastic of different core colors. Â 3.0 Â Name: water sink(hot water sink and cold water sink)
Water sink specification:
304 stainless steel material, the thickness of stainless steel 2.0mm.
Movable water sink
Circulating water device:
1 set of centrifugal pump with power 1.1kw;
circulating water sink: 304 stainless steel material, maybe connected with the cooling device.
Water inlet pipe:
1/2 with stainless steel stop valve
Water outlet pipe:
1/2 with stainless steel stop valve
4.0 Â Name: infrared ray diameter gauging device
Diameter measuring scope:
0.1~15mm
Accuracy:
+/-0.05um
Measuring speed:
2*1200s/second
The diameter measured can be displayed at the operation panel of the mainframe for the convenience of adjusting the speed of extruding machine or traction to ensure product diameter. Able to test transparent and circular products. Able to test the data of every surface of plastic wire comprehensively in a three-dimensional manner. 
5.0  Name: horizontal wire storage support The length of horizontal wire storage support is 4.5m. The gear motor of 0.75kw drives the magnetic power clutch to control the linkage of tension and wire-rewinding machine. The winding speed is adjusted according to the length of stored wire and the largest length of stored wire is 80m. The plastic wheel for wire storage >Φ120mm, wheel number 9+9, the wire storage wheel and shaft are installed with bearing to reduce the resistance. The part of chain transmission is installed with safety protections.  6.0  Name: traction machine
Power:
0.4kw
2 polyurethane wheels are assembled through pressure spring and sliding device.
Type og running wheel:
Φ120mm
 7.0  Name: automatic winding device
Power:
2.5kw/4p, "TECO" frequency converting control
Flexible flat cable:
Φ20mm bar gathering stand
YAN MING meter counter may set the forecast time and predicated output. The meter counter will alarm automatically when the predicted output is reached. Applicable wire shaft according to the requirement of buyer's company(Φ200-Φ300mm) Â
Â
Â
Â
Â
Packing & Shipment
Our machine is first painted with anti-corrosive oil, then wrapped in plastic film before being finally packed in a wooden case.
Packing: wooden case for export, suitable for multiple handling and long distance marine shipping.
Delivery time: within 30-45 work days.
Â
Â
Â
Â
Company Information
Tenda, headquartered in Nanjing, China, is a global manufacturing and trading company in the field of high-performance plastics and rubber processing equipment, extrusion solutions, masterbatch and compounding, etc. Its unit, Nanjing Tengda Extrusion Company, is a professional manufacturer of twin screw extruders, single screw extruders, two-stage extruders, and their related auxiliaries. We tailor solutions from raw materials, materials processing equipment, to injection for different customers. Each Tenda solution is designed, manufactured, and commissioned by experienced teams of professional engineers and after-sales staffs.
 
Â
Â
Â
Our Service
Pre-sales service:
-Introducing in detail features and application of the products to customers.
-Selecting economical and practical machines and equipment for customers.
-Providing operational data of the related machines and equipment.
-Providing means of trial performance for customers.
Â
Sales service:
-Recommending engineering conditions required for installation of the machines and equipment.
-Communicating the manufacturing progress of the machines with users on time.
-Providing assistance in technical conditions, screw combination, and barrel disposition needed for the product.
Â
After-sales service:
-Providing on-site technical assistance in installation, commissioning, and training.
-Filling in detailed customer information.
-Providing long-term maintenance service and spare parts.
-Giving technical support to customers for developing new products.
-Providing free maintenance for 1 year.
Â
Â
Â
FAQ
Q: Are you a trading company or manufacturer?
A: We are a factory. We have a technical production team, and all workers are very experienced.
Â
Q: Why choose us?
A: ---You can get a very fair price from us, and our price can help you beat your competitors in the market.
  ---Our excellent service:
       1. For a quick, no hassle quote, just send an email to the customer.
       2. We promise to reply with a price within 24 hours.
       3. If you need advice, just call our export office at +86 025 52296133, and we will answer your questions immediately.
  ---Our quick manufacturing time:
       1. For normal orders, we promise to produce within 30 work days.
       2. As a manufacturer, we can ensure the delivery time according to the formal contract.
Â
Q: What kind of certification do you have?
A: Our products have obtained ISO9001 and CE certifications, ensuring quality. We focus on the field of extrusion machines and aim to be the best manufacturer in this field.
Â
Q: What's the payment?
A: T/T, Western Union, PayPal, MoneyGram, and others.
Â
Mini 3D Printing Plastic Filament Extruding/Extruder
     Mini 3D Printing Plastic Filament Extruding/ExtruderÂ
Â