HXDL-70 cable slide structure features and working principle

1, the set of products from the flat cable, carrying four-wheel trolley with cable and guide three major components. Flat cable uses non-flammable materials, can be used for indoor and outdoor and contact with oil pollution place, has a certain degree of weather resistance, and the round cable has a smaller bending radius, long life and other advantages.

The track adopts cold-rolled steel plate once cold drawing to ensure the accuracy of the track section size, replaces the angle steel and other conductive methods unsafe, the weight is heavy, the indoor slide wire accumulates ash, the outdoor ice causes the circuit short circuit, which affects the shortcomings of the use. It also has domestically unique features. The length of the track unit is 4-6m using a coupler connector, which can be expanded to any length as needed.

2. Working principle: The beginning of the flat cable (connected to the field junction box) is fixed on the fixed end of the guide rail, and then fixed to the four wheels carrying the cable in turn according to the allowable space for operation on the site, with an appropriate length (1-2.5mm). On the trolley, the cable end (connection power supply) is fixed on the last trolley (truck). Through the reciprocating movement of the spring-pulled trolley on the cart, the dragging of the cable (length exceeding 20m, for example, the original traction rope should be taken into consideration to prevent the cable from pulling force), all the carts can be freely slid at any speed in the rolling path, and the rail is installed. Simple, no debugging, and no contact with the power supply, safe and reliable.

3, complete product structure 1) orbital track is the carrier of the cable trolley. There are straight segments and arc segments with a radius of more than 500 mm. Straight segments have a length of 4 m (or 6 m) and can be extended by coupler connections.

2) First car: The first car is the traction of the cable car. It needs to drive the movement of the car behind it by other moving bodies. The four fully enclosed roller bearings are used as the running wheels. The sliding is very flexible and can be used for dust. Larger occasions.

3) Intermediate trolley: The walking wheel of the middle cable carrying trolley is also a fully enclosed bearing. The part of the clamping clip cable adopts a curved soft rubber cushion, so that the cable is not easily damaged. Both the first car and the middle cable car have crash buffers to ensure that the car is not hit by starting and stopping.

4) Coupling joint: Cold rolling plate rolling forming, through the bolt stop action, make two connections, unlimited extension guide rail.

5) Hanger: Suspends the track, the bolt stops, makes the guide rail unable to shake. Elliptical mounting holes can correct the track linearity.

6) Beginning: The starting section of the guide rail, the cable at the beginning is fixed, one end enters the cable carrying trolley, and the other end enters the power supply box.

7) End: Installed on one end of the rail to prevent the first car from sliding out of the track.

8) Fork: Pull the cart to reciprocate.

Roof Clips is the similar to the Stamping Parts .

Hangzhou Yibo Machinery Co.,Ltd, founded in 2003 is an professional machinery manufacturer for design, produce, service and trade.

Yibo's main products are Cold Roll Forming Machine, such as purlin Forming Machine , guardrail forming machine, roof panel forming machine, wall panel forming machine, tile forming machine, floor Deck Forming Machine, Roof Seaming Machine and so on; steel coil process machinery such as Slitting Line , Cut to Length Line, combined line and so on; accessory stamping parts such as roof supporting clips, connect bar, water bar and so on.


Roof Clips

Roof Clips,Steel Roof Clips,Metal Roofing Clips,Steel Tile Bracket

HANGZHOU IUWON TECHNOLOGY CO,. LTD. , https://www.iuwon.com