When there's something wrong with the scooter carburetor, to change the carburetor is not the only solution to make your scooter works perfectly again.You can consider to order the Carburetor Repair Kit. PZ26 carburetor repair kit is applied in CG125,PZ27 is applied in CG150,PZ30 is applied in CG200-250CC.So Sonora Motors suggest that buyer should choose the carburetor repair kits depending on the model of the carburetor or the exact scooter model.Sonora Motors now can supply carburetor repair kit for CN250,CF250,Yamaha Zuma,Yamaha 2 stroke JOG and many others. Carburetor Repair Kit Crf150 Carburetor Repair Kit,Vespa Carburetor Repair Kit,Honda Cb650 Carburetor Repair Kit SONORA MOTOR COMPANY , https://www.sonoramotor.com
2, multi-position machine tool spindle using high-speed grease, use a period of time should be disassembled the main shaft with kerosene to clean the bearings and then apply high-speed grease.
3, the machine uses 32 # mechanical oil, at least 2 times each shift.
4, the machine must be kept clean, immediately evacuated, the active site does not allow water and dirt.
5. Clean up the column regularly, at least once per week. 6. Clean the work surface every day.
7. Clean the electric turntable after finishing it every day, and remember to add at least two lubricants per week.
8. Clean the multi-axis machine every day and remember to add oil.
9. Clean the electrical box and motor every day, check the position of the electrical device, ensure that the electrical device is fixed, safe and tidy, and maintain ventilation. Check that the ground is intact.
How to properly maintain multi-station machine tools?
1.Before using the multi-position machine tool, you must be familiar with the installation, commissioning and maintenance of the machine tool. Before starting the machine, you should check whether the components are in good condition, whether the movement is flexible, whether the workpiece is clamped, and whether the operation is safe. After confirming that the empty car will be opened for five minutes, high-speed cutting will require 15 minutes of empty car for machining.