Digital Cumulative Counting Electronic Punch with Magnetic Induction Proximity Switch
This digital counting device is designed for precise and reliable operation in various industrial and commercial applications. It utilizes magnetic induction technology to detect and count objects efficiently without the need for physical contact. The unit features a large five-digit LCD display, ensuring easy readability even in low-light conditions.
Key Features:
- Five-digit large LCD with ultra-low power consumption and clear display
- Easy installation and accurate counting via magnetic induction
- Counting speed of up to 20 times per second
- Reset function available via internal or external button
- Operates on a standard 5th size battery, eliminating the need for an external power source
- Anti-vibration design ensures stable and reliable performance
- No mechanical wear, offering safe and long-lasting operation
Technical Specifications:
- Power Supply: 1.5V AA battery (not included)
- Counting Range: 0–99999
- Operating Temperature: -5°C to 40°C
- Minimum Pulse Width: 10ms
- Dimensions: 64 x 38 x 38 mm
- Magnetic Detection Distance: 5–10 mm
- Non-Detection Distance: ≥30 mm
- Hole Size: 61 x 36 mm
- Weight: Approximately 100g
Product Configuration:
- One digital counter
- One magnet
- One magnetic induction switch
- One pair of mounting supports
Battery Installation Instructions:
- Ensure the battery is installed before use.
- Loosen the two external screws on the cover and gently remove the back cover (do not damage the signal cable).
- Insert one 5th size battery (not included). A standard battery lasts over six months, while a high-performance one can last more than one and a half years.
- Reinstall the back cover and secure it with the two external screws.
Usage Instructions:
- To start counting, connect the magnetic induction switch to the counting terminal.
- Position the magnet and switch appropriately on the device.
- When the magnet approaches and moves away from the switch, the counter will register a count.
- During operation, keep the magnet within 0.5–1 cm of the switch, then move it to 3–5 cm to continue counting.
- Pause counting by pressing the "Count/Pause" button. The LCD will turn off after 0–30 seconds and enter standby mode.
- Press the button again to resume counting.
- To reset, press the reset button directly or connect an external reset button.
Application Tips:
Adjust the position and distance between the magnet and the induction switch during installation for optimal performance. Ensure that the magnet moves away from the switch to trigger the count accurately.
Contact Information:
Alan Xue
Yueqing Kampa Electric Co., Ltd.
Tel: +86-577-62729846 | Fax: +86-577-62780320 | Phone: +86 15167874317
Web: www.china-kampa.com
Injection Tooling & Mold Built
Injection Tooling & Mold Built,Plastic Part Injection Molding,Parts Injection Molding,Injection Molding
Wisegroup Precison Mold Ltd , https://www.wisegroupasia.com