Did you trick you into using the tanker air conditioning in hot weather?

We can feel that the season of natural saunas is ready to enter, and if air conditioners are used improperly on the way to a tank car, it will cause people to suffer a lot in such hot weather, and even severe heat stroke may occur. Therefore, drivers and friends should use the tanker air conditioner correctly, otherwise improper use may cause discomfort to the air conditioner.

1, there are some busy weekdays tanker drivers have to wait until the effect of air conditioning completely bad, will suddenly think of it on the air conditioning to be cleaned, such an approach is not entirely correct, tanker The air conditioner filter needs regular maintenance and replacement, and some areas with more serious sand and dust weather also need to pay attention to it. Shacheng and catkins fly on the filter, which will breed bacteria for a long time, resulting in The air conditioner will produce musty smell, so after waiting for the spring to go off, the owner of the tanker should change the air conditioner filter once, and the condenser also needs regular cleaning. The water tank can be removed and cleaned to achieve Good results.

2. When some tanker drivers do not use air conditioners, they will randomly adjust the direction of blowing of the air conditioners. This is not only unfavorable to the effect of air conditioning, but with the lower level of air-conditioning, the principle of hot air will rise. The correct way to use it is to raise the air outlet upwards when opening the air conditioner, and when the heater is turned on, the air outlet should be played downwards.

3, the southern winter temperatures are generally warmer than the north, some south tanker owners will not even use air conditioners throughout the winter, but if the long-term air conditioning is not applicable, it will lead to inside The rubber ring is aging, and the oil on the internal parts of the air conditioner also becomes dry. It requires regular start-up of the tanker air conditioner, which allows each part to be lubricated with lubrication oil, allowing it to be located in a very Good use status. In the case of how to use the air conditioner, it is still necessary to start the air conditioner once every week.

4, the summer is relatively hot everyone will want to be cool, some tanker drivers into the hot cabin will open the inner circulation of the air conditioner, do think that can make the temperature in the cab down quickly In fact, the effect of doing so will not be very good. When entering the cab, the windows should be opened for ventilation, and then the outer circulation should be opened to discharge the heat and wait for the temperature of the cab. After falling, it was changed into an internal loop.

5. Most tanker drivers suddenly think of turning off the air conditioner after turning off the vehicle. This is a certain injury to the vehicle's engine, because when waiting for the next start of the tanker, The tanker will bring together the load of the air conditioning to start together. Such a high load will damage the engine. Therefore, before each stop, it is necessary to turn off the air conditioner before turning off the engine, and the tanker should wait for two or three minutes each time the engine is started. After the engine is lubricated, the air conditioner is turned on. (Text / Sun Ni)

smtplaza is the wholesale for SMT FujiPick up nozzle, SMT Fuji placement nozzle, FUJI CP6 04mm Nozzle WPH9724, Fuji CP nozzle, Fuji SMT 5.0mm NOZZLE S050 Y3602 ADEPN8075, FUJI NXT H01 H04 H08 H12 SMT SMD Nozzle, FUJI CP7  SMT SMD Nozzle Fuji nozzle holder, Fuji nozzle syringe with original new good quality, best price, and wonderful searvive warranty.

smtplaza is one-stop source for original and high quality second resource spare parts for SMT Pick & Place Machines and PCB Assembly Equipment: Vacuum Nozzles, Cutter Blades, Glue Dispense Nozzles, SMD Component Feeders, SMT Feeder Accessories, Vacuum Pumps and Accessories, Filters, Springs, Lamps, Belts, and more!

Fuji SMD SMT Pick-up Nozzle ASSY

Smt fuji nozzle, Fuji chip mounter nozzle, SMT Fuji NXT nozzle, Fuji XP nozzle,Fuji pick and place nozzle

SMTPLAZA CO., LIMITED , https://www.smtpartsupply.com