Deep in love with Jiangling and Isuzu

The chassis of the special vehicle mostly uses the second type chassis, which is composed of frame, suspension, front and rear axles, engine, gearbox, transmission shaft and braking system. With cab, it can drive independently. According to the brand points: heavy truck, liberation, Foton, Dongfeng, JAC, Hualing, Jiangling, Isuzu, etc. Here are just a few common brand chassis, if subdivided, it may not be able to list everything, one for each brand There are a large number of subcategories, and secondly, the chassis of special vehicles are constantly being introduced.

How much do you know about the ever-changing special-purpose vehicle chassis? How do you know about the common double-ring chassis Isuzu and JMC for the light-card industry? How much do you know? So today, we learn with doubts and understand what kind of love and hatred there is between Isuzu and JMC.

Isuzu

五十铃

Isuzu is a Japanese car company brand. Its trademark has undergone two changes. It is a trademark that has been modernized with the Roman alphabet "ISUZU". Isuzu was formerly the Ishikawajima shipyard of Tokyo. It manufactured Japan’s first truck in 1918, and began production of the A9 sedan in 1922. In 1937, it merged with Datsun Automobile Company, Tokyo Gas and Power Industrial Company, and Kyoto Domestic Company, and in 1949. The company officially changed its name to Isuzu Motors.

五十铃

Isuzu Motors products are popular with users all over the world for their robust, durable and heavy loads. Although Isuzu started with heavy trucks, it is not only limited to heavy trucks, but also light trucks and diesel engines. After joining hands with Chongqing Qingling and authorizing Qingling to use ISUZU's product LOGO, Qingling also launched a series of Isuzu vehicles. Although it is synchronized with Isuzu's products, it is technically advanced and quality-wise. not bad.

The Isuzu truck cab has single and double row cabs. The single row can be turned forward. The wheelbase of the second type chassis used for light truck modification is mostly 3360mm, oil brake, 5-speed gearbox, 2.5T front axle, 5T rear axle, The tires are available in both nylon and wire tyres, and the engine uses an Isuzu engine developed and manufactured by the company. Its Isuzu diesel engine is a recognized brand in the industry, and many car companies choose to use the Isuzu engine.

五十铃发动机

The Isuzu engine is small and compact, saving vehicle space; large torque, good climbing performance; and low noise, weak vibration; at the same time, in the case of improving power performance, it can also achieve the purpose of saving fuel, in other words, fuel-saving space. Big.

Second, Jiangling

江铃

Jiangling is a domestic automobile brand and its trademark is Jiangling Motors Co., Ltd. (English), the abbreviation of JMC. Jiangling was founded in 1968, starting from a small factory that was on the verge of collapse, and it has 15 subsidiaries. Its headquarters is located in Jiangxi, and was listed in Shenzhen at the end of 1993. It became the first listed company in Jiangxi Province and was established in 1995. American Ford Motor Company formed a strategic partner.

Although Jiangling’s start is inconspicuous, it focuses on innovation. By introducing foreign investment, it also absorbs the world’s most cutting-edge product technologies, manufacturing processes, and management concepts, and establishes systems suitable for its own R&D, logistics, sales services, and financial support. And operating mechanism. And has China's first-class engine, casting, stamping, body, assembly and other dozens of modern production lines, Jiangling "Baodian" pickup trucks and transport passenger and cargo passenger car is a national inspection-free products.

江铃

Jiangling products focus on user experience and continuously develop new products based on customer needs. He also responded quickly to related policies. Jiangling has rapidly upgraded to State IV when phasing out the country’s three products, with little price fluctuations. To date, Jiangling has had four major series of more than 400 kinds of models, and its light trucks also occupy a place in the Chinese market segment. Light trucks are generally equipped with single and double row cabs, single row can be turned forward, five-speed gearbox, oil brake, 1.5T front axle, 3T rear axle, 7.00 wire tires, exhaust brake, wheelbase more than 3360mm, launch part The Isuzu engine was used, and now its own Jiangling engine is used.

江铃发动机

Jiangling Engine absorbs the advanced technology R&D and production of Ford and other products, and has small-displacement turbocharging technology, dual variable valve timing technology, and the most advanced direct injection technology in the industry.

From the above information on Jiangling and Isuzu, it seems that there is no correlation between the two. Can it really be? It is said that they once had a feeling.

In 1993, JMC, Isuzu, and Itochu Corporation entered into a joint venture to establish Jiangling Isuzu Motors Co., Ltd. Among them, JMC holds 75% of the shares, and Japan Isuzu owns 12.5% ​​of the other 25%, which symbolizes the full cooperation of Japan's Isuzu and JMC Group in technology, capital, and management. Later, due to various reasons, Isuzu withdrew Jiangling, and JMC began to move toward independent research and development.

In March 2013, the Jiangxi Isuzu project passed the approval of the National Development and Reform Commission for a joint venture period of 20 years. It was announced that this project has been fully recognized and supported by the country. The project of the Jiangxi Isuzu Automobile Co., Ltd. entered the approval of the commercial sector and the industrial and commercial registration stage.

In April 2013, Jiangxi Isuzu Automobile Co., Ltd. was established. JMC and Isuzu each contributed 50% of the total investment, with a total investment of 4.402 billion yuan (including engine company 1.718 billion yuan).

Seeing here, there may be doubts. How come another Jiangxi Isuzu? What is the relationship between Jiangxi Isuzu and Jiangling and Isuzu? Jiangling and Jiangxi Isuzu are both Jiangxi automobile manufacturers. The difference is that Jiangling is an independent brand and Jiangxi Isuzu is a joint venture brand.

Finally, according to the relationship between Jiangling, Isuzu, Jiangling Isuzu, Jiangxi Isuzu, and Jiangqi Group, Xiao Bian has drawn a simple chart. If any errors or omissions occur, please also submit suggestions.

江铃、五十铃、江铃五十铃、江西五十铃、江汽集团关系图

Editor's Note: Jiangling and Isuzu have the same choice of light trucks, different manufacturers, different R&D and processes. If the engine is the heart of a car, although Jiangling once owned the heart of Isuzu, but nowadays, the heart is all home and each has its own advantages, depending on who you prefer.


Category:

Tooling for special tooling / fixtures / general standard tooling (similar to standard).

Fixture,or Mechanical Fixtures,as its name implies, is used to clamp the workpiece clamping device (or guide tool).

Die: the device to define the shape and size of the production object.

The tool: use in mechanical manufacturing tool basically used for cutting metal materials, so the "tool" is generally understood as metal cutting tools,like Diamond Tools.

AIDS: generally refers to connect tool and machine tool.

Instrument: use various devices to store the production of objects or tools at work or in the warehouse.

Check gauge: equipment inspection in the production use.

Fixture: manufacturing systems, the word corresponding to fixture, sometimes work with synonyms, sometimes also refers to the general fixture, Taiwan / Japanese / Korean electronic enterprises to use the word. Belongs to the fixture industry A containing fixture, belonging to a subordinate relationship.

 

Application:

The fixture is used for machining workpiece fastening quickly, when the machine tool, workpiece holding device, process correct relative position. That is to say workholding fixture processing machinery is an indispensable component in the machine tool technology to high-speed, efficient, precise, complex, intelligent, environmental protection direction driven by the fixture technology towards high fine, efficient, module combination, general economic development. Also called fixture fixture. Broadly speaking, any process, in the process for rapid, convenient and safe installation device of the workpiece can be called the fixture. Such as welding fixture, test fixture, assembly jig, fixture and so on. The fixture is the most common, often referred to as the fixture. In the processing machine parts, in order to make the surface of the workpiece to achieve drawing size requirements, geometry and other surface the mutual position precision, before processing The workpiece must be installed (location), to (clamp). Application of machine tool fixture, to ensure the machining accuracy, stable product quality; to improve labor productivity and reduce costs; improve the working conditions of workers, to ensure safe production; to expand the scope of machine tool technology, to achieve a "machine" the positioning element (usually by the fixture. Determine the correct position of a workpiece in the fixture), clamping device, tool guide element (to determine the tool and workpiece relative position or direction guiding tool), indexing device (processing, so that the workpiece can complete the number of stations in a single setup of the rotary indexing device and mobile line dividing device two), connecting element and fixture (jig base) and other components.

Toolings and Fixtures

Toolings And Fixtures

Toolings And Fixtures,Mechanical Fixtures,Production Toolings,Diamond Tools

VESTA Motoring Ltd , https://www.vesta-industry.com