Building Materials And Equipment Static Classification Machine,Static Classification Machines,Static Classification Equipment, Building Rotating Distribution Tray Sichuan Shichuang Micro Nano Technology Co.,Ltd , https://www.scwnpowder.com
Content
No.
Production Line
Quantity
1
Mixing machine
1 set
2
Drying hopper
1 set
3-1
ABS PLA PVC single screw extruder
1 set
3-2
Bush die
1 set
4
Water channel
1 set
5
Wire storage support
1 set
6
Traction machine
1 set
7
Infrared ray diameter gauging device
1 set
8
Winding machine
1 set
9
Single coil forming machine
1 set
Main Technical Parameter
1.0 Name: Drying Hopper
Volume: 60L
Output: 50kg/h
Heating Power: 10kw
Features: Protects the fan and electric heating tube. Uses high-quality electrical components for stable performance. Heating tubes are made of 304 stainless steel, non-polluting with long service life. Sealing rings use insulating silicone rubber.
Â
2.0 Name: Single Screw Extruder (TD-LSJ50)
Screw:
--Diameter: Φ50mm;
--L/D=25:1
--Screw Material: 38CrMoAlA
--Surface Treatment: Hard chromium plating, thickness 0.5–0.6mm, hardness HRC65
--Compression Ratio: C/R=3.0 BM screw
--Rotating Speed Range: 10–80rpm
--Designed for special rollers of ABS, PLA, PA plastic.
--Internal and external surfaces of rollers treated.
--Heater: Stainless steel heater with polished internal surface and stainless steel external surface.
--Heating Sections: 3 sections, 1.8kw per section
--Cooling: High-efficiency air cooling with low noise.
--Cooling Sections: 3 sections, 120w per section.
Reduction Box:
--Hard tooth surface reduction box with spiral speed reduction transmission.
--ZLYJ173 hard tooth surface helical gear reduction box, using 20CrMn material, precision gear grinding, noise below 75Db, centrifugal lubrication.
--Bearing Brand: Japan "NSK"
3.0 Name: Driving Motor:
--AC "TECO" frequency converter, "Wannan" motor.
4.0 Name: Water Channel (Hot and Cold Water)
--Material: 304 stainless steel, 2.0mm thick.
--Circulating water system: 1 set centrifugal pump, 1.1kw motor, 304 stainless steel channel, connectable to cooling devices.
--Inlet Pipe: 1/2" with stainless steel shut-off valve.
--Outlet Pipe: 1/2" with stainless steel shut-off valve.
5.0 Name: Horizontal Wire Storage Support
--Length: 4.5m.
--Gear motor of 0.75kw drives magnetic clutch to control tension and rewinding machine.
--Adjust winding speed based on stored wire length; maximum 80m.
--Plastic wheels >Φ120mm, 9+9 wheels, installed with bearings to reduce resistance.
--Chain transmission parts include safety protections.
6.0 Name: Traction Machine
--Power: 0.4kw.
--Two polyurethane wheels with pressure spring and sliding device.
--Running Type: Φ120mm.
7.0 Name: Infrared Diameter Gauging Device
--Measurement Range: 0.1–15mm.
--Accuracy: ±0.05μm.
--Measuring Speed: 2×1200s/second.
--Displayed on mainframe operation panel for adjusting extruder or traction speed to ensure product diameter.
--Capable of testing transparent and circular products.
--Comprehensive three-dimensional testing of plastic wire data.
8.0 Name: Winding Machine
--Type: Dual-shaft shallow shaft winding machine (customer provides coil size).
--Power: 2.5kw/4P, "TECO" frequency control.
--Flexible flat cable: Φ20 bar gathering stand.
--"YAN MING" meter counter sets forecast time and output. Automatically alarms when predicted output is reached.
--Applicable wire shaft: as per customer requirements.
Â
TENDA, headquartered in Nanjing, China, is a global manufacturer and trader specializing in high-performance plastics and rubber processing equipment, extrusion solutions, masterbatch, and compounding. Its subsidiary, Nanjing Tengda Machinery Co., Ltd., is a professional manufacturer of twin-screw extruders. Our 3D printing filament extruder is designed for efficient production of high-quality filaments from materials like ABS, PLA, and PVC. The system includes a mixing machine, drying hopper, single screw extruder, bush die, water channel, wire storage support, traction machine, infrared diameter gauge, winding machine, and single coil forming machine. Each component is engineered for durability, precision, and ease of operation. The entire unit is packaged in wooden cases or containers, suitable for international shipping. With a production time of 45 working days, we ensure timely delivery and reliable performance. Our machines are coated with anti-corrosive oil, wrapped in plastic film, and packed in sturdy wooden crates. This ensures safe transport and long-term protection. Whether you're looking for an automated solution or custom configurations, TENDA offers a complete range of extrusion systems tailored to your needs.
3D Printing Plastic Filament Extruder of Tenda
3D Printing Plastic Filament Extruder of TENDA