The Ministry of Finance issued a notice on June 28th about the Golden Sun demonstration work. The central government will continue to arrange funds to support the implementation of the Golden Sun demonstration project. The demonstration standard for the use of crystalline silicon modules will be 9 yuan per watt, using amorphous materials. The silicon thin film module is 8 yuan/watt; the subsidy standard for the independent photovoltaic power generation project is determined separately. The scope of support includes user-side photovoltaic power generation projects built on a contiguous basis. The installed capacity shall not be lower than 10 MW in principle; the user-side photovoltaic power generation projects with conditions such as existing buildings shall have an installed capacity of not less than 300 kW; use of smart grid and micro grid technology User-side photovoltaic power generation projects built; independent photovoltaic power generation projects built in remote, non-electric areas. The supporting project implementation unit must be one of self-built power users, specialized energy service companies, and distribution network (microgrid) investment operating entities, and the project capital should not be less than 30% of the total investment. Among them, if the project implementation unit and the building owner of the project are different subjects, a long-term agreement must be signed by means of contract energy management. The independent photovoltaic power generation project owner must have the ability to ensure the long-term operation of the project. According to the notice, the centralized concentrator demonstration project listed in the catalog and the user-side photovoltaic power generation project of 2 MW or more, the Ministry of Finance approved the amount of the grant, issued the budget at 70%, and conducted liquidation before June 30, 2012; Projects that are completed and liquidated in accordance with the prescribed deadline will, in principle, take back reward funds and will no longer make arrangements. For the user-side photovoltaic power generation projects below 2 MW, the pre-disbursement method is no longer adopted. After the project entity completes the acceptance check before June 30, 2012, the Ministry of Finance once approved and issued the subsidy funds.
Glue Making Machine is made of high-density polyethylene PE, which is non-toxic, odorless and guaranteed in quality.
1. Frame
The outer frame is welded and formed by hot-dip galvanized steel pipe (all steels of Ansteel 51D+Z and 53D+Z models), and the bottom tray is fixed by anti-skid screws (grade 8.8), which is strong, durable and corrosion-resistant. The 2mm thick bottom middle beam provides strong support to ensure the safety of the tonnage during transportation. Reasonable structure, can be loaded and unloaded by forklift.
2. Valve
The container is equipped with a plastic valve. The valve material is acid and alkali resistant, suitable for the discharge of various liquids.
3. Stirring port
The stirring port of the container is equipped with a lid, which can be covered when not stirring for easy storage. The stirring port is 150mm.
4. Feeding port
The lid equipped with the feeding port of the container can be covered to prevent the liquid from overflowing when the feeding port is not feeding, and the feeding port is 350mm.
5. Liner
Large-capacity packaging, using water (density of 1) as the medium, each can be filled with a weight of one ton (take 1000 liters as an example);
The volume scale is cast on the inner tank, and the user can clearly see the full height of the liquid in the container by using the transparent characteristics of the container.
Anti-ultraviolet, anti-aging, easy to clean, non-toxic, high strength, corrosion resistance, good hygiene, safe and reliable;
Automatic Mixing Equipment,Glue Making Machine,Glue Powder Mixing Equipment,Mixer Powder Machine Zhengzhou Enlin Import And Export Trade Co., Ltd , https://www.enlintrade.com