What happens if the garbage truck hydraulic mechanism fails to operate properly?


When the hydraulic mechanism of the garbage truck is not working properly, first check whether the power take-off is engaged properly, whether the hydraulic oil in the fuel tank is sufficient, and whether the suction valve ball valve is fully opened. Specific troubleshooting methods are as follows.

First, the garbage truck hydraulic mechanism has no action. Follow the steps below to check it. The steps are as follows:

1. Is there sufficient oil in the hydraulic tank? When insufficient, hydraulic oil should be added;

2. Observe whether the oil inlet pipe from the fuel tank to the oil pump will cause the oil sucking phenomenon due to aging. If this is the case, replace the inlet tube.

3. Check if the gear pump fails. Put a pressure gauge, turn the pressure regulating bolt, and observe whether the table has reached the specified value;

4. If the pressure regulator bolts fail to reach the required hydraulic pressure after they are all screwed in, the gear oil pump fails and the gear pump must be replaced.

5, if the gear oil pump works normally, it is the multi-way reversing valve plugging. The valve plug should be removed to remove impurities and used after reinstalling.

Second, the garbage truck hydraulic mechanism has action but no power, check whether the gear pump fails, and whether the system pressure reaches the specified value.

3. The hydraulic mechanism of the garbage truck will slow down and check if the gear oil pump fails, the oil suction filter, and the oil return filter core are blocked.

High Speed Stacking Door

Material Selection:

1. Frame: 2MM thicknesses cold-roll Stainless steel.

2. Motor: Germany SEW brake motor (outer), power 0.75KW, power supply 220V.

3. Control system: Imported Japan Mitsubishi converter and PLC to control of electric box (150%1HZ)

4. Opening & closing speed: 0.6-1.5m/s (adjustable).

5. Safety Device: Korea Photocell Sensor, emergency stopping reaction when sensing obstacles.

6. Curtain: France high-density polyester fiber and the surface coating processing, thickness 0.8MM, variety colors can be chose: Red, yellow, blue, green, orange, gray, white, transparent, etc. Tensile strength: 4000/3500N/5cm, tear strength 600/600N. Fire-proofing level: German standard DIN75200 Usage temperature: -30 ° C +70 ° C.

7. Wind resistant: The Aluminium alloy Reinforce Girder to increase wind resistant effect.

8. Curtain replacement function: Aluminium alloy Reinforce Girder is loaded between 2 pieces Curtain, can be replaced easily if any curtain broken, save your cost.

9. Transparent window: 1.2MM thickness transparent PVC window, size and location is up to your request, more safer.

10. Seal: Seal brush are Installed inside the guides, and the special bottom design, to fit any uneven ground.

11. Cotrolling way: Push button + radar sensor, very convenient.

12. Limiting Switch: Mechanical limiting switch, easily and exactly.

13. Emergency STOP: With emergency stop button on control panel, can stop easily by

Hand once disconnect or accident

14 Fault recovery function: All Hongfa's production is with fault recovery function, system will self-recovery after power cut off.

15. Delivery time: About 7 business days with contract and deposit confirmed.

16. Pyament item: 50% before production, and the other 50% before shipment.

17. Warranty Details: We provide 12 months warranty for all doors and accessories (except man-made disasters, Irresistible natural disasters, ect^).

We have many professional engineers with rich experience, qualified products, perfect service system, and good cooperation relationship with many famous companies.

High Speed Stacking Door, High Speed Stack Door, PVC high speed stacking door, Rapid stacking door, Fast stacking door

SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfafd.com