Flanged DIN Pn16/JIS 10K Pneumatic Angle Seat Piston Control Valve Flange End Steam Valve

  • Model NO.: 1/4"~4"(DN10-DN100)
  • Media: Gas, Oil, Water, Acid
  • Connection Mode: Flange
  • Material: Stainless Steel
  • Working Pressure: 0.1-1.6MPa
  • Port Size: Dn10,15,20,25,32,40,50,65,80,100
  • Acting: Double Acting,Normally Open/Cloase(No/Nc)
  • Manual Overrides: with Manual Overrides Device(Optional)
  • Trademark: neutral brand or customizable
  • Specification: 1/2"~4"(DN15~DN100)
  • HS Code: 8481202000
  • Certification: GS, RoHS, CE, ISO9001
  • Standard: Standard
  • Power: Pneumatic
  • Type: Single Seater
  • Air Control Supply Pressure: 0.3--0.8MPa
  • Actuator Cylinder Size: 27/40/50/63/90/90al/125al
  • Actuator Material: Stainless Steel or ABS Plastic
  • Optional Accessories: Ep-Positioner,Solenoid Valve,Limit Switch
  • Transport Package: Packing with Plywood Case
  • Origin: China
Investment casted stainless steel angle seat valve pneumatic angle seat piston control valve for steam
Design feature:
Stainless steel or gunmetal housing with sleeve, clamped or welded connection
High flow rate
Over 3 years long service life, 3 million cycles loaded test.
Trusted inner parts for long cycle life
Large accessory program with stroke limitation and feedback
Robust actuators with modular accessory program
Investment casting

SPECS.
Size: 1/4"~4"(DN10-DN100)
P/N: DIN 1.6MPa, JIS 10K
Meium: neutral-water/oil/gas,steam,organic solvent,weak acid,weak alkaline
Fluid temp. : -50ºC--230ºC
Ambient temp: -10ºC--80ºC
Operation: pneumatic
Control medium: neutral air
Air control supply pressure: 0.3--0.8MPa

Material:
Body: ASTM-A351 CF8/CF8M
Seat: PTFE,RPTFE,PPL
Stem: ANSI-304/ANSI-316
Seal: NBR,Viton,Fluororubber
Cap: PA6,ABS,stainless steel ASTM-A351 CF8/CF8M
Flange: DIN PN16, JIS 10K
Thread: BSP;BSPT;NPT;DIN;JIS;G;RC
Connection: threaded,flange,butt weld/socket weld/clamp(fast-installation)

Operation
angle seat piston valve is a pneumatically-controlled valve with a piston actuator providing linear actuation to lift a seal off its seat. The seat is set at an angle to provide the maximum possible flow when unseated. Angle seat piston valves are particularly suited to applications where high temperatures and large flowrates are required, such as steam or water. When used in reverse some models of angle seat piston valve will eliminate water hammer when operated.

Why choose us ?
We not only deisgn and manufacture valves, but also handling in valve mould tooling,design&development around Wenzhou.

*More complete drawing and technical specs pls contact us.
Flanged DIN Pn16/JIS 10K Pneumatic Angle Seat Piston Control Valve Flange End Steam Valve
Flanged DIN Pn16/JIS 10K Pneumatic Angle Seat Piston Control Valve Flange End Steam Valve
Flanged DIN Pn16/JIS 10K Pneumatic Angle Seat Piston Control Valve Flange End Steam Valve


 

Sepdiesel Injector Control Valve For Delphi, one type of Injector Control Valve, is to control the accurate flow of diesel to spray when the high pressure injector works. Its structure is distinctive, but its effect is similar with other control valves. The control valve is also a quick-wear spare part like others, which make it often changed when the injector doesn`t work properly. It`s necessary to replace the used control valve to reduce the cost while other parts of the injectors are OK. Sepdiesel injector control valve is a best choice for you with high quality and reasonable price. SEPDIESEL is a high end supplier of diesel fuel injection parts and is one of the first manufacturers engaged in injector control valve in China.

Injector Control Valve For Delphi

9308-625C,28278897,Fuel Injector Control Valve,Diesel Engine Injector Control Valve

SEPDIESEL , https://www.sepdiesel.com